
Diamond pool cover
Symphony Compact Box 1
A pool cover in a standardized size, delivered as a kit. We will help you check the dimensions, installation requirements, and delivery location before placing your order.
The model at a glance
A good fit if… want a boxed enclosure assembled on site.
- Material
- Polycarbonate
- Height and profile
- Low arched shape, 0.8 m
- Rails and opening
- Three sections; rail position checked
Delivered unassembled with pre-assembled panels. Roof dimensions: 3.5 × 6.4 × 0.8 m. Dimensions refer to the roof, not the pool.
What is included?
Your quote specifies the model, dimensions, material, rails and delivery. It also states whether installation is included.
Your main choices
Check ceiling dimensions, the placement of the rails, and available clearance. Plan for on-site installation; any installation assistance is agreed separately.
Design and dimensions
The box cover is installed on site.
Compact Box 1 consists of three sections and has specified model dimensions of approximately 3.5 × 6.4 × 0.8 meters. It is delivered unassembled with pre-assembled end panels. The specified model dimensions should not be used as a final assembly drawing. The total dimensions of the roof and the substrate need to be checked for the selected delivery.
Get to know Box 1.
Box 1 has three sections and the manufacturer's specified dimensions of 3.5 × 6.4 × 0.8 meters. The dimensions apply to the cover and need to be checked against your pool, the placement of the rails, and the surrounding space. Tell us what your setup looks like, and we will help you further with the installation and a quote.
Request a quoteInstallation and delivery
Measure the pool and surrounding area, including coping and obstructions. Check the base for the rails, door clearance and where the enclosure will sit when retracted.
The exact contents and responsibilities are confirmed in your quote.
Good to know
Frequently Asked Questions about Symfonie Compact Box
What are the dimensions of Compact Box 1?
The manufacturer specifies approximately 3.5 × 6.4 × 0.8 meters and three sections for Compact Box 1. These are the roof's specified model dimensions, not an indication of the maximum pool size or free height. We will check the current drawing, rails, and total installation height before you prepare the base.
How much do we need to assemble ourselves?
Compact Box is delivered as a kit with pre-assembled end panels. Sections, rails and fasteners need to be assembled according to the manufacturer's instructions. Check work steps, tools and assembly assistance before ordering. A kit does not mean that installation on the property is included.
Will the cover fit a pool that has already been built?
It may work if the pool dimensions, the base, and the surrounding areas are suitable. Send photos of the long sides, short sides, and pool edge, along with approximate dimensions. Include the stairs, ladder, any changes in level, and the area where the cover will be stored.
How much space is needed when the roof is open?
The retracted sections require their own parking area. This depends on the size of the roof, the number of sections, and the design of the rails. Let us know if you want to retract the roof completely away from the water surface, and we will check that the drawing and the available space allow for this.
What surface is required for the rails?
The base needs to be stable, level, and suitable for the fastening method prescribed by the manufacturer. Existing decking or paving needs to be assessed based on its construction and condition. Plan the entire route of the tracks, including behind the pool.
Can we swim with the roof closed?
It depends on the clear height under the roof, the water level, and the design of the entrance. Make sure you can get in and out of the pool easily. If swimming under the roof is important to you, we need to take that into account when selecting the size and height.
How much does the Symfonie Compact Box cost?
The price needs to be calculated based on the current design and delivery address. Check what is included in terms of panels, rails, door, transport, unloading, installation, and fastening. Then you can compare quotes for the same finished result.
What should we consider before delivery?
We review the access route, unloading area, and how the parts can be moved to the pool. Prepare the base according to the approved drawing. The delivery method and any required lifting assistance must be agreed upon before the transport is booked.
How do we maintain the roof throughout the year?
Follow the maintenance instructions for the selected panel material and the roof's moving parts. Keep the rails free of gravel and leaves and check the locks and fasteners according to the instructions. Follow the model's instructions in snow and wind; the roof is not a walking surface.
How do we control locking and pool protection?
Ask to have locking, openings, and anchoring reviewed for the cover you order. The pool cover needs to function as a whole when the pool is not in use. The cover's model name or a lock itself is not enough information about the cover's suitability. Active supervision is required when the pool is open.
Trust is earned.
Does the Symfonie Compact Box fit my pool?
Send pictures and approximate dimensions of the pool and the surrounding areas. We will help you assess the space and develop a well-thought-out proposal.