Skip to content
Pool & Spa Halmstad
EN
Shopping cart (0)
Contact us

What are you looking for?

Type at least two letters to see product suggestions.

A little help from Droppe

Tell me what you need and I will guide you to the right product.

Pool & Spa Halmstad Advice & inspiration

Dispense pool and spa chemicals with the right surface

Base your water care plan on the measured values, water volume, and product label.

Insta-TEST strips for testing pool and spa water

Pool chemistry becomes easier when you start with the water parameters and read the dosage instructions for the specific product you have in front of you. Here is a reliable procedure to follow without having to guess the amounts.

1. Test before treating

Use a test kit suitable for your pool or spa system and follow the test kit's own color scale and instructions. Record the result, the volume of the pool or spa, and which products you already use. A picture of the water may show a problem, but it cannot replace a water test.

2. Choose the right product for the right system

Pools and spas have different water volumes and products. Read the product's intended use, the packaging label, and the manufacturer's instructions before purchasing or dosing. Do not use a product for a different system simply because the name is similar.

3. Calculate from the label, not from a general table

The dosage depends on the product's concentration, the measured water quality, and the water volume. When the label specifies an amount for a certain volume, you can calculate proportionally: label amount × your water volume ÷ label's specified volume. Always check whether the instructions refer to start-up, maintenance, or correction; the same product may have different dosages for different uses. If you are unsure about the water volume or the instructions, ask us before adding anything.

4. Follow the product's method and test again

Read on the label how the product should be added, whether the circulation needs to be running, and when you can test again or swim. Do not change multiple water parameters at once. Follow the product's specific safety and protection instructions.

Store and handle safely

  • Store chemicals in their original packaging, out of reach of children, and according to the label.
  • Never mix different chemicals together. Use separate, clean tools according to the product's instructions.
  • Follow warning labels, protection instructions, and local waste disposal instructions.

This guide helps you understand the process. It does not replace the label, safety information, or the manual for your system. The exact dosage and time until the water is ready for swimming should always come from the product in question.

Explore pool chemicals and spa chemicals in the webshop.

Questions about dosage and water care

Can a picture of the water indicate how much chemistry is needed?

No. We need current measurements, water volume, and information about the products being used. Pictures can help describe the problem, but they cannot replace a water sample or the product's dosing instructions.

Can I use the same dose for two products with similar names?

No. Concentration, area of application, and method may vary. Always read the label of the product you are actually using and check whether the instructions apply to startup, maintenance, or correction.

Would you like some help with your water?

Tell us about the volume of the pool or hot tub, the water values from your test strips, and which product you use. Then we can help you find the right instructions and product.

Ask us about water conservation

Pool & Spa Halmstad

Menu

Contact us Call us: 035–500 00
DroppeYour guide at Pool & Spa Halmstad
Step 1 of 4

How can we help you?

Hi, I am Droppe! I help clarify questions and find the next step. We are here to help whenever you are ready.

How can we help you?

Prefer to call? 035 500 00