A good winter closure starts with the right instructions for your specific pool, technique, and protection. This checklist helps you prepare the questions and the process.
Review the system in good time
Get out the instructions for the pool, pump, filter, heater, dosing and cover. Check which parts need to be in operation, drained, protected or brought in when it gets cold. Different designs may require different water levels and handling, so never use a general guideline for all pools.
Six steps to plan
- Clean the pool. Remove debris, clean the bottom and waterline and check the filtration.
- Check the water. Test according to your equipment's instructions and follow the product label for any treatment. Never mix chemicals.
- Protect the equipment. Follow the manufacturer's instructions for the pump, filter, heater, hoses and any automatic systems. Standing water in frost-exposed parts needs to be handled correctly.
- Check the water level. The correct level depends on the pool type, inlets, skimmer and winter solution.
- Securely install the cover. Check the fastening and ensure that snow or wind loads are handled according to the instructions for your cover.
- Document. Write down what has been done, photograph the connections and keep spare parts and instructions in a known place for the spring.
When should you ask for help?
If you lack instructions for the pool's construction, are unsure about frost protection or have several interconnected technical systems, seek help before closing. Doing things in the wrong order can cause unnecessary problems in the spring. We offer service and advice and will help you develop a plan for your system.
For chemicals, the label and safety information for the product you are using always apply. Never use a general dosage from an article instead.
Questions about winter closure
Should the water level be lowered by the same amount in all pools?
No. The correct level depends on the pool's construction, equipment, and winterization method. Follow the instructions for your specific pool and do not drain the entire pool based on a general guide. Ask for help if the documentation is missing.
Is it enough to turn off the pump before winter?
No, the entire system needs to be inspected. Frost-susceptible pipes, pumps, filters, heaters and other equipment may require different measures. Some solutions require continued operation. Follow the instructions of the respective manufacturer and document what has been done.
Would you like some help with your pool?
Tell us which pool and equipment you have, and we’ll help you create the right winter plan.
See our service







